What key points should be noted when dealing with Medical Mould in injection molding? Due to its precision nature, all specifications must be carefully set to minimize mold transformation. For injection molding engineers, precisely controlling the dimensions of injection products and die-casting molds is crucial, based on design drawings, manufacturing techniques, and processing technologies.

How to solve the deformation problem of injection molds?

Product deformation in injection molding enterprises is a widespread and complex issue. Upon analysis, addressing this societal hotspot requires more than just equipment adjustments; the key to solving deformation lies in mold design formulation and supervision. Summarizing the actual causes of deformation, the treatment strategies are as follows:

Key research achievements are as follows:

1. When deformation is caused by injection molding standards, reduce injection pressure, increase the ambient temperature of the Medical Mould, ensure uniform mold temperature, raise the epoxy resin temperature, or use quenching methods to reduce internal stress.

2. For deformations caused by poor ejection behavior due to internal stress, consider increasing the number or area of ejector pins, adjusting the ejection angle, etc.

3. When cooling is uneven or insufficient, adjust the cooling method and increase cooling time. Setting the cooling circuit as close as possible to the deformation area can also improve the deformation issue.

4. For deformations caused by molding shrinkage, the design scheme of the Medical Mould must be modified. Importantly, ensure consistent thickness of the mold. Sometimes, if necessary, the Medical Mould must be adjusted based on precise measurement of part deformation to counteract the opposite direction.

Through the application of the above scientific research results, we have not only improved the manufacturing precision of medical injection molds, but also provided scientific basis and practical guidance for deformation control in the industry. In the pursuit of excellence, we will continue to explore and bring more innovations and breakthroughs to the medical injection molding field.